XH-W3005 Digital Humidity Controller AC 220V Hygrometer Transmitter Sensor
Multifunctional humidity controller, this device can be used to control the humidity in many places,
such as farm and other factories.
Product adopts industrial-grade chip, high-precision SHT20 temperature and humidity sensors, ensure the
products with good reliability, high precision and interchangeability.
Adopt RS485 hardware interface (with the lightning protection design), the protocol layer compatible
with standard industrial Modbus Rtu protocol.
Stable and safe chip make this device more intelligent and effictive.
After trepanning, it can install or embed on various equipments, and was convenient as well as practical.
Can be used to control the humidity in many places, such as farm and other factories.
Power Type: DC12V 120W /DC24V 240W /AC220V 1500W
Display Type: Digital
Humidity Range: 00% – 99% RH
Measuring Accuracy: + / – 2% RH
Control Accuracy: + / – 0.1% RH
Output Capacity: up to 10A
Output Type: Direct Output
Item Size: 60 * 45 * 31mm / 2.36 * 1.77 * 1.22in
Hole Size: 73mm / 2.87in
Aperture Size: 4mm / 0.16in
Connect to power supply, diplay instructions humidity.
Set to Start the Humidity: Press the UP button display and start the humidity, long press about
3 seconds to start the humidity flashing, then press the UP or Down to adjust the set.
Set to Stop the Humidity: Press the Down button display and stop the humidity, long press about
3 seconds to stop the humidity flashing, then press the UP or Down adjust the set.
Restore the Factory Settings: Press the UP and Down button at the same time, it will display 888
then will automatically detect the humidity.